Thank you for considering Bi Technologies Corporation part number 7609-1417-0, an item we carry that is listed with the NSN 5905-00-140-0206 and product description “Resistor Variable Wire Wound Nonprecision.” This component is available for purchase through our website at this time, so complete the Request for Quote (RFQ) form provided below if you would like to receive pricing information for your comparisons. Simply offer our staff details like your desired quantity, budget, and delivery timeline to help us craft the best solution for your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We aim to make the process of locating and procuring exact items simple, which is why we feature key listing details with every offering. For example, part number 7609-1417-0 was specifically produced by Bi Technologies Corporation under CAGE Code 73138, and with the NSN 5905-00-140-0206, it belongs to FSC 5905 Resistors. Additionally, all stock comes delivered with any applicable qualifying certifications or manufacturer trace documentation for your further benefit. With all of this in mind, be sure to submit a request for part number 7609-1417-0 today, knowing we will be in touch shortly after reviewing your information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-140-0206 Item Description: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 001400206 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7609-1417-0 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.74900 INCHES MINIMUM AND 0.75000 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.06250 INCHES NOMINAL |
| ABHP | III OVERALL LENGTH | 5.968 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.06250 INCHES NOMINAL |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.532 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 4.281 INCHES MAXIMUM |
| ADAV | III OVERALL DIAMETER | 2.000 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.09375 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.60 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 550.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS ALL SECTIONS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 2666.0 1ST SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 2666.0 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3636.0 MINIMUM AND 3641.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
