Thank you for considering Electra Motors Operation Power part number 18030-30, an item we carry that is listed with the NSN 3040-00-116-5182 and product description “Worm Shaft.” This component is available for purchase through our website at this time, so complete the Request for Quote (RFQ) form provided below if you would like to receive pricing information for your comparisons. Simply offer our staff details like your desired quantity, budget, and delivery timeline to help us craft the best solution for your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We aim to make the process of locating and procuring exact items simple, which is why we feature key listing details with every offering. For example, part number 18030-30 was specifically produced by Electra Motors Operation Power under CAGE Code 95779, and with the NSN 3040-00-116-5182, it belongs to FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, all stock comes delivered with any applicable qualifying certifications or manufacturer trace documentation for your further benefit. With all of this in mind, be sure to submit a request for part number 18030-30 today, knowing we will be in touch shortly after reviewing your information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-116-5182 Item PartTypeName: WORM SHAFT | 3040 | 001165182 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18030-30 | C | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | IDENTICAL |
| ABHP | OVERALL LENGTH | 11.594 INCHES MINIMUM AND 11.656 INCHES MAXIMUM |
| BYFR | TEETH HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 0.8378 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 25.000 |
| CFFG | WORM HELIX ANGLE | 7 DEG 36 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 2.533 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 2.000 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM |
| CFFN | WORM THREAD SECTION LENGTH | 5.500 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 7.601 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.531 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.933 INCHES MINIMUM SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.938 INCHES MAXIMUM SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.211 INCHES MINIMUM FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.273 INCHES MAXIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.564 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.565 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.626 INCHES MINIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.626 INCHES MINIMUM SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.627 INCHES MAXIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.627 INCHES MAXIMUM SECOND END,FIRST PORTION |
| CFGJ | INVOLUTE SPLINE QUANTITY | 28 SECOND END,THIRD PORTION |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 SECOND END,THIRD PORTION |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 1.4000 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFGM | INVOLUTE SPLINE LENGTH | 0.844 INCHES NOMINAL SECOND END,THIRD PORTION |
| MATT | MATERIAL | STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI/SAE 8620 FED STD SINGLE MATERIAL RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
