Thank you for considering General Dynamics Global Imaging part number 11RC25A, an item we carry that is listed with the NSN 5990-00-891-5113 and product description “Resolver Electrical.” This component is available for purchase through our website at this time, so complete the Request for Quote (RFQ) form provided below if you would like to receive pricing information for your comparisons. Simply offer our staff details like your desired quantity, budget, and delivery timeline to help us craft the best solution for your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We aim to make the process of locating and procuring exact items simple, which is why we feature key listing details with every offering. For example, part number 11RC25A was specifically produced by General Dynamics Global Imaging under CAGE Code 10112, and with the NSN 5990-00-891-5113, it belongs to FSC 5990 Synchros and Resolvers. Additionally, all stock comes delivered with any applicable qualifying certifications or manufacturer trace documentation for your further benefit. With all of this in mind, be sure to submit a request for part number 11RC25A today, knowing we will be in touch shortly after reviewing your information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-891-5113 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 008915113 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11RC25A | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.5500 INCHES MINIMUM AND 2.5650 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.5500 INCHES MINIMUM SINGLE SHAFT AND 0.5650 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.990 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0620 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0000 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1852 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 385.00 NOMINAL |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0/5.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1900 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1960.00 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.975 ROTOR TO STATOR NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
