Thank you for considering Servo Instrument Corporation part number 749-6255, an item we carry that is listed with the NSN 5905-01-030-2864 and product description “Resistor Variable Wire Wound Non.” This component is available for purchase through our website at this time, so complete the Request for Quote (RFQ) form provided below if you would like to receive pricing information for your comparisons. Simply offer our staff details like your desired quantity, budget, and delivery timeline to help us craft the best solution for your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We aim to make the process of locating and procuring exact items simple, which is why we feature key listing details with every offering. For example, part number 749-6255 was specifically produced by Servo Instrument Corporation under CAGE Code 19176, and with the NSN 5905-01-030-2864, it belongs to FSC 5905 Resistors. Additionally, all stock comes delivered with any applicable qualifying certifications or manufacturer trace documentation for your further benefit. With all of this in mind, be sure to submit a request for part number 749-6255 today, knowing we will be in touch shortly after reviewing your information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-030-2864 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 010302864 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2889692 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.3250 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL |
| ABNC | FLAT HEIGHT | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.285 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.969 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.930 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 165.0 NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AEGJ | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE,DOUBLE THROW |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 170.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.7 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | SPRING |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 DC |
| TEST | TEST DATA DOCUMENT | 49956-2889692 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
