Thank you for considering Sps Technologies Inc part number TX1024D3-6-7A, an item we carry that is listed with the NSN 5305-01-473-8509 and product description “Screw Close Tolerance.” This component is available for purchase through our website at this time, so complete the Request for Quote (RFQ) form provided below if you would like to receive pricing information for your comparisons. Simply offer our staff details like your desired quantity, budget, and delivery timeline to help us craft the best solution for your needs.
Note : We Will Not Share Your Information To Any Third Parties.
We aim to make the process of locating and procuring exact items simple, which is why we feature key listing details with every offering. For example, part number TX1024D3-6-7A was specifically produced by Sps Technologies Inc under CAGE Code 0PTK6, and with the NSN 5305-01-473-8509, it belongs to FSC 5305 Screws. Additionally, all stock comes delivered with any applicable qualifying certifications or manufacturer trace documentation for your further benefit. With all of this in mind, be sure to submit a request for part number TX1024D3-6-7A today, knowing we will be in touch shortly after reviewing your information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-473-8509 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 014738509 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1024D3-6-7A | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.437 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.437 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
